DIGITRONIC DI108 electronics set


Designed for up to 8 cylinders direct injection engines.
IMPORTANT! To connect this ECU the DIGITRONIC USB interface with the following code 203000034 is required.
The control unit D108 is dedicated to direct injection engines up to 8 cylinders, in which the fuel is injected at a high pressure directly in the combustion chamber.




3, 4, 5, 6, 8

Waterproof, shock-resistant, aluminum housing
Waterproof 60+48-pin harness connectors for connection with the unit
Intelligent software with lots of options
Supply voltage: Vbatt=10÷16V
2 power outputs for gas solenoid valves
Up to 8 gas injectors with the following characteristics Imax=6, Vbatt,max=16V
Operating temperature: -40÷105°C
Current absorption with the actuators disabled: Imax=0.5A
Current absorption in the standby mode: Istandby <5uA


  • Switch with horn signal and level indicator.
  • PT-MAP sensor.
  • Harness with waterproof plugs.
  • Waterproof fuse box.
  • Integrated OBD II.


36 months warranty from the date indicated on the product.

The warranty applies only when the installation of the kit was made in the certified by the DIGITRONIC conversion center.

Configure Digitronic Autogas

installation that will fit into your needs

Are you interested in DIGITRONIC AUTOGAS products?
or call us
Contact us